309/782
2. Go to ZyWALL/USG MONITOR > VPN Monitor > IPSec and verify the tunnel Up Time
and the Inbound(Bytes)/Outbound(Bytes) traffic. Click Connectivity Check to
verify the result of ICMP Connectivity.
Hub_HQ > MONITOR > VPN Monitor > IPSec > WIZ_L2TP_VPN
3. Go to ZyWALL/USG MONITOR > VPN Monitor > L2TP over IPSec and verify the
Current L2TP Session.
MONITOR > VPN Monitor > L2TP over IPSec > L2TP_Remote_Users
4. Go to iOS operating system Start > Settings > Network & Internet > VPN and show
Connected status.
Menu > Settings > VPN > ZyXEL_L2TP
To Next Page
Loading...
