ZyXEL Communications ZyWall ATP series - Page 506

506/782
www.zyxel.com
In the Flood Detection section, set Block Period for the duration applies blocking
to the destination IP address. Set a Threshold number (the number of packets per
second that match the flood detection criteria) for your network. Click OK.
CONFIGURATION > Security Policy > ADP > Profile > Base Profile > Traffic Anomaly
Click the Protocol Anomaly tab. A Name is automatically generated that you can
edit. Enable or disable individual rules by selecting a row and clicking Activate or
Inactivate. Edit the default log options and actions by selecting a row and
making a selection in the Log or Action drop-down menus. Click OK.
CONFIGURATION > Security Policy > ADP > Profile > Base Profile > Protocol
Anomaly