ZyXEL Communications ZyWall ATP series - Page 580

580/782
www.zyxel.com
ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > BWM > Configuration > Add Policy,
select Enable and type HTTP Any-to-WAN as the policy’s Description (Optional).
Leave the Incoming Interface to any and select the Outgoing Interface to be
wan1. Select Service Type to be the Service Object and select HTTP from the list
box.
Set the Guaranteed Bandwidth Inbound to 600 (kbps) and set higher Priority 3. Set
the Maximum to 800 (kbps). Set the Guaranteed Bandwidth Outbound Priority 3.
In order to view the result later, set the Log setting to be log alert. Click OK to
return to the General screen.
CONFIGURATION > BWM > Configuration > Add Policy