630/782
Configure descriptive SSID name (1-32 characters) for the wireless LAN. Select Pre-
Shared Key (8-63 characters) to add security on this wireless network. Otherwise,
select None to allow any wireless client to associate this network without
authentication.
Select Hidden SSID to hide the SSID from site tool scanning.
Select Enable Intra-BSS Traffic blocking if you want to prevent crossover traffic
from within the same wireless network. Wireless clients in that network can still
access the wired network but cannot communicate with each other.
For Built-in Wireless AP only, ZyWALL/USGs with W in the model name have a built-
in AP. Select an interface to bridge with the built-in AP wireless network. Devices
connected to this interface will then be in the same broadcast domain as devices
To Next Page
Loading...
