ABB ACS2000 - Fan Outlet Box Installation - Frame 1 (if Required)

5-4 (14) 2UEA001270 Rev. F ACS2000 User manual
Chapter 5 - Mechanical installation
5.4.4 Fan outlet box installation - Frame 1 (if required)
Figure 5-3 - Frame 1 Fan outlet box
Dimensions (L x W x H) 1150 x 840 x 180 mm [45 x 33 x 7 in]
Weight Approximately 37 kg [80 lbs]
Tools • Torx screwdriver
or 10 mm hex wrench to install the hexagon fastening screws.
5.4.4.1 Fan outlet box installation procedure - Frame 1
.
Figure 5-4 - Frame 1 Fan outlet box installation
1 Consider the weight of the fan outlet box when lifting it onto the top of
drive.
The box can be lifted by means of a forklift or a crane.
2 Being careful not to damage the sealing gasket, line up the outlet box
holes with the predrilled holes in the top of the drive for proper
orientation.
Legend
1 Fan outlet box
1
Legend
1 Fan outlet box
2 Sealing gasket
3 Predrilled holes
4 Top of drive
1
2
3
4