ACS2000 User manual 2UEA001270 Rev. F 4-1 (8)
Chapter 4 - Transportation, storage and disposal
4.1 Transportation
The transport conditions for the drive are based on IEC 60721-3-2
“Classification of environmental conditions: Classification of groups of
environmental parameters and their severities; Transportation”.
Classification: 2K4 / 2B1 / 2M1
See Appendix C - Technical data/environment/operation/Environmental/
Transport, located on the CD, for detailed information.
4.1.1 Unpacking and inspection
Proceed as follows:
1 Remove all packaging material carefully. Do not use sharp or pointed
tools.
2 Check the drive and accompanying equipment for damages.
3 Compare the complete delivery with the purchase order and the
packing list.
4 If parts are missing or damaged, immediately inform the shipping
company and the ABB service organization.
We recommend that you photograph the damages and send the
photographs to ABB.
To Next Page
Loading...
