GI-10 (14) 2UEA001270 Rev. F ACS2000 User manual
General information on manual and equipment
Related documentation
The following documents are available for supplementary information:
Zero speed threshold Used in the manual to indicate that the drive has reached
the value “zero speed” that is set in a parameter. The
value can be set in the range from 0 to maximum speed
(speed is measured in rpm).
Term/Abbreviation Meaning
Title Document number Location
Modbus - NMBA-01 installation and start-up guide 3AFY58919772 Appendix B
Ethernet - user manual ethernet adapter module
NETA-01
3AFE64605062 Appendix B
Profibus - NPBA-12 installation and start-up guide 3BFE64341588 Appendix B
Anybus DeviceNet module – user manual
Anybus EtherNet IP module – user manual
Anybus ControlNet module – user manual
Spare parts list Appendix F
MV switchgear guide 2UEB000132 Appendix G
Power cable specification 2UEB000093 Appendix H
Pulse encoder (NTAC-01) manual 3AFY58919730 Appendix K
Motor temperature supervision 2UEB000133 Appendix L
Troubleshooting guide
The troubleshooting guide provides information on
the root cause of an alarm or fault and provides
hints for corrective measures.
Appendix N
DriveMonitor 3000 user manual 3BHS268039 Appendix O
Integral input contactor disconnect operation guide 2UEB000245 Appendix P
Induction motor specification 2UEA000091
Service and maintenance manual 2UEB000096
Preventive maintenance manual 3BHS248911
Warranty directives 3BHS404420 ZAB E01
To Next Page
Loading...
