ABB ACS2000 - Fan Outlet Box and External Fan Installation - Frames 2, 3 (if Required); Figure 5-3 - Frames

ACS2000 User manual 2UEA001270 Rev. F 5-5 (14)
Chapter 5 - Mechanical installation
3 Fasten the fan outlet box to the top of drive by securing the supplied
screws into the press nuts that are fitted on the underside of the
predrilled holes.
5.4.4 Fan outlet box and external fan installation - Frames 2, 3 (if required)
The fan outlet box and the required fastening screws may be supplied
separately.
Figure 5-3 - Frames 2, 3 Fan outlet box and external fan
Tools Torx screwdriver
or 10 mm hex wrench to install the hexagon fastening screws.
See Appendix D - Mechanical drawings, located on the CD, for specific
information on the dimensions and weight of the drive.
WARNING
Wiring connections will need to be made. Make sure no power is
connected to the drive before proceeding with the fan installation.
Legend
1 Fan outlet box
2 External fan
1
2