ABB ACS2000 User Manual

ACS2000 User manual 2UEA001270 Rev. F GI-7 (14)
General information on manual and equipment
Illustration conventions
Frame 1, ACS2000 4k V, is used for general layout and location photos
unless expressly stated. The electrical layout, the physical order, and the
topology are shared between all frames.
• Terminal Entry Unit (TEU) and LV COntrol Unit (COU) are shared with
all frames, left bay.
• The Input Filter Unit (IFU), filter bay, grows to accommodate the
higher current for each frame.
• The INverter Unit (INU) and power modules, right bay, grow to
accommodate the higher current for each frame.

ABB ACS2000 Specifications

General

Cooling Method	Air-cooled
Motor Type	Synchronous and asynchronous motors
Enclosure	IP54
Frequency Range	0 Hz
Control Principle	Closed-loop
Communication Interfaces	Modbus, Profibus, Ethernet
Storage Temperature	-40°C to +70°C
Relative Humidity	Up to 95% non-condensing
Altitude	Up to 1000m without derating