ABB ACS2000 - Figure 5-6 - Frames

ACS2000 User manual 2UEA001270 Rev. F 5-11 (14)
Chapter 5 - Mechanical installation
5.4.5.1 Redundant fan installation procedure - Frames 2, 3
Consider the size and weight of the components when planning to lift them
onto the top of drive.
The fan components can be lifted by means of a forklift or a crane.
1 Remove the cover and the fan from the redundant fan assembly.
.
Figure 5-6 - Frames 2, 3 Redundant fan box
2 Remove the fan hole cover plate from the top of the drive.
3 Lift and properly orientate the empty redundant fan box on top of the
drive, being careful not to damage the sealing gasket.