ACS2000 User manual 2UEA001270 Rev. F GI-1 (14)
General information on manual and equipment
Copyright notice
The information in this manual is subject to change without notice.
This manual and parts thereof must not be reproduced or copied, or
disclosed to third parties, nor used for any unauthorized purpose without
written permission from ABB Inc., Medium Voltage Drives.
The hardware described in this manual is provided under a license and
may be used, copied, or disclosed only in accordance with the terms of
such license.
Document identification
Ownership ABB Inc.
Document number 2UEA001270
Revision index F
Issue date 04.01.2014
Equipment covered by the manual
Table GI-1 Identifying the drive frame
This manual covers standard equipment and provides generic information
on the equipment. The manual does not claim to cover all variations and
details of the equipment, nor to consider all eventualities that may arise
during installation, commissioning, operation and maintenance of the
equipment.
If the equipment is adapted to specific customer needs or applications,
and handling, installation and operation of the equipment are affected by
these modifications, information on these modifications is provided in the
appropriate documentation (e.g. layout drawings, wiring diagrams,
technical data, engineering notes).
If information is required beyond the instructions in this manual refer the
matter to ABB. See section Contact information.
Frame Normal duty range kW [hp] Drive type code (first 11 positions)
1 224-746 [300-1000] ACS2040-1x-
2 933-1492 [1250-2000] ACS2040-2x-
3 1697-2238 [2250-3000] ACS2040-3x-
To Next Page
Loading...
