ABB ACS2000 - Safety Labels and Signs; Safety Labels

1-4 (12) 2UEA001270 Rev. F ACS2000 User manual
Chapter 1 - Safety
1.4 Safety labels and signs
1.4.1 Safety labels
Safety labels are attached to the cabinet where necessary to alert
personnel of potential hazards when operating or working on the
equipment. It is important to read and understand these labels. The
instructions on the safety labels must always be followed. The labels must
be kept in place and legible.
A label that is damaged or missing must be replaced. Contact ABB for
replacement.
1.4.1.1 Label identification
The safety labels are identified by means of a number printed in the footer
of the safety label.
Figure 1-1 Safety label identification
The last two digits of the safety label number identify the language of the
label text. In Figure 1-1, for example, the last two digits 09 identify
English.