ABB ACS2000 - Quality Certificates and Applicable Standards; Trademarks

ACS2000 User manual 2UEA001270 Rev. F GI-5 (14)
General information on manual and equipment
Quality certificates and applicable standards
The following certificates and conformity declarations are available with
ABB:
• ISO 9001/ISO 14001 certificates stating that ABB Inc. has
implemented and maintains a management system that fulfills the
requirements of the normative standards
• EC Conformity Declaration
• Standards and certifications
EN, IEC, CE and cUL.
Meets IEEE 519 and IEC 61000-2-4
Trademarks
Names that are believed to be trademarks of other companies and
organizations are designated as such. The absence or presence of such
a designation should, however, not be regarded as an offense to the legal
status of any trademark. The following registrations and trademarks are
used in this manual:
Windows ® Registered trademark of Microsoft Corporation
Industrial IT
TM
Trademark of ABB
DriveWare ® Registered trademark of ABB
DriveMonitor
TM
Trademark of ABB
Ethernet ® Registered trademark of Xerox Corporation
Profibus ® Registered trademark of Profibus International (P.I.)
ControlNet ® Registered trademark of ControlNet International, Ltd.
Modbus ® Registered trademark of the Modbus IDA organization
DeviceNet ® Registered trademark of the Open DeviceNet Vendor Association, Inc.
Kirk ® key Registered trademark of the Kirk Key Interlock Company
Anybus ® Registered trademark of HMS Industrial Networks, Inc.
3M Scotch-Brite
TM
Registered trademark of 3M