ABB ACS2000 - Figure 5-5 - Frame; Figure 5-6 - Frame; Figure 5-7 - Frame; Figure 5-9 - Frame

10-22 (32) 2UEA001270 Rev. F ACS2000 User manual
Chapter 10 - Troubleshooting and maintenance
4 Install a new filter mat Use only replacement filter mats of the same filter
class, thickness, and size as the original filter mat:
• Filter class: G3 (EN779)
• Thickness: approximately 10 mm [0.4 in]
• ABB supplies replacement filter mats as specified
in Table 10-3.
Table 10-3 Filter mat identification
Place the new filter mat against the opening. Tuck the
edges into the metal frame.
INU and AFE
Filter
mat
ABB
replacement
part number
Qty
Width
mm [in]
Height
mm [in]
Frame 1 2UEA001026 2 445 [17.5] 740 [29.0]
Frame 2 2UEA001704 2 830 [32.7] 795 [31.3]
Frame 3 2UEA002487 4 550 [21.7] 795 [31.3]
Input Filter Unit
Filter
mat
ABB
replacement
part number
Qty
Width
mm [in]
Height
mm [in]
Frame 1 2UEA001042 1 600 [23.5] 1120 [44.0]
Frame 2 2UEA001694 1 646 [25.4] 610 [24.0]
Frame 3 2UEA001694 1 646 [25.4] 610 [24.0]