GI-4 (14) 2UEA001270 Rev. F ACS2000 User manual
General information on manual and equipment
Operation Personnel include all persons who operate the equipment as required for
the specified application. Personnel must know the driven process and be
adequately trained to operate the equipment. Special knowledge of
frequency converter technology is not required.
Maintenance Personnel must be thoroughly familiar with the construction of the
equipment, be adequately trained to check the equipment and to perform
the scheduled service and maintenance tasks. Personnel must know the
safe shutdown and grounding procedures for the equipment.
Relevant chapters of the manual
User’s responsibilities
It is the responsibility of those in charge of the equipment to ensure that
each person involved in the installation, operation or maintenance of the
equipment has received the appropriate training and has thoroughly read
and clearly understands the instructions in this manual and the relevant
safety instructions.
Intended equipment use
Those in charge of the equipment must ensure that the equipment is used
as specified in the contractual documents, operated under the conditions
stipulated in the technical specifications and on the rating plate of the
equipment, and serviced in the intervals as specified by ABB.
Unauthorized modifications and constructional changes of the equipment
are not permitted.
Chapter Handling Installation Operation Maintenance
General information
xxxx
1-Safety
xxxx
2-Power electronics
and cabinet features,
Overview
xx
4-Transportation
x
5-Mechanical
installation
xx
6-Electrical installation
x
8-Operation
x
10-Troubleshooting
and maintenance
x
To Next Page
Loading...
