ABB ACS2000 - Page 172

9-16 (24) 2UEA001270 Rev. F ACS2000 User manual
Chapter 9 - CDP control panel
9.3.4.2 Setting functions procedure
1 To enter the function
mode, press the
FUNC key.
2 To select a function (a
blinking cursor
indicates the selected
function), press the
corresponding slow
navigation key.
3 To enter the contrast
setting function, press
the ENTER key.
4 To change the contrast
value, press the
corresponding slow
navigation key.
1 L ->
0.0 rpm
UPLOAD
DOWNLOAD
<= <=
=> =>
4
CONTRAST
1 L ->
0.0 rpm
UPLOAD
DOWNLOAD
<= <=
=> =>
4
CONTRAST
1 L ->
0.0 rpm
CONTRAST
[4]
1 L ->
0.0 rpm
CONTRAST
[6]