226 Actual signals and parameters
in wg inches of water gauge 59
ft wg feet on water gauge 60
lbsi pounds per squared inch 61
ms millisecond 62
Mrev millions of revolutions 63
d days 64
inWC inches of water column 65
m/min meters per minute 66
Nm Newton meter 67
Km3/h thousand cubic meters per hour 68
min 69
m3 Reserved for solar pumps 70
m6 71
Reserved 72...116
%ref reference in percentage 117
%act actual value in percentage 118
%dev deviation in percentage 119
% LD load in percentage 120
% SP set point in percentage 121
%FBK feedback in percentage 122
Iout output current (in percentage) 123
Vout output voltage 124
Fout output frequency 125
Tout output torque 126
Vdc DC voltage 127
3406 OUTPUT1 MIN Sets the minimum display value for the signal selected by
parameter 3401 SIGNAL1 PARAM. See parameter 3402
SIGNAL1 MIN.
Note: Parameter is not effective if parameter 3404
OUTPUT1 DSP FORM setting is DIRECT.
-
x…x Setting range depends on parameter 3401 SIGNAL1
PARAM setting.
-
3407 OUTPUT1
MAX
Sets the maximum display value for the signal selected by
parameter 3401 SIGNAL1 PARAM. See parameter 3402
SIGNAL1 MIN.
Note: Parameter is not effective if parameter 3404
OUTPUT1 DSP FORM setting is DIRECT.
-
x…x Setting range depends on parameter 3401 SIGNAL1
PARAM setting.
-
All parameters
No. Name/Value Description Def/FbEq
To Next Page
Loading...
