Introduction to the manual
1
Introduction to the manual
Chapter overview
The chapter includes a description of the contents of the manual. In addition it
contains information about the compatibility, safety, intended audience, and related
publications.
Compatibility
The manual is compatible with ACS800 Center Winder/Unwind Control Program
(Version BJXR3300 and above). See 33.01 SOFTWARE VERSION.
Safety instructions
Follow all safety instructions delivered with the drive.
• Read the complete safety instructions before you install, commission, or use
the drive. The complete safety instructions are given at the beginning of the
Hardware Manual.
• Read the software function specific warnings and notes before changing the
default settings of the function. For each function, the warnings and notes are
given in this manual in the subsection describing the related user-adjustable
parameters.
Reader
The reader of the manual is expected to:
• know the standard electrical wiring practices, electronic components, and
electrical schematic symbols.
• have a firm understanding of winding and unwinding principles.
Contents
The manual consists of the following chapters:
• Start-up instructs in performing an ID Run.
• Control panel gives instructions for using the panel.
• Program features contains the feature descriptions and the reference lists of the
user settings and diagnostic signals.
• Master/Follower describes the setup to even load systems with multiple ACS800
drives that operate motors, which are interconnected by belts, gears, or chains.
• Application macros contains a short description of each macro together with a
connection diagram.
To Next Page
Loading...
