ABB ACS800 Series - Reference Types and Processing; Settings; Diagnostics

Program features
26
Reference types and processing
It is possible to scale the external reference so that the signal maximum value
corresponds to a speed other than the maximum speed limit.
Settings
Diagnostics
Parameter Additional Information
Group 11 REFERENCE SELECT External reference source, type and scaling
Group 20 LIMITS Operating limits
Group 22 ACCEL/DECEL Speed reference acceleration and deceleration ramps
Group 32 SUPERVISION Reference supervision
Actual Signal Additional Information
Group 02 ACTUAL SIGNALS The reference values in different stages of the reference
processing chain.
Parameter
Group 14 RELAY OUTPUTS Active reference / reference loss through a relay output
Group 15 ANALOG OUTPUTS Reference value