ABB ACS800 Series - Actual Signals; Settings; Diagnostics

Program features
31
Actual signals
Several actual signals are available:
• Drive output frequency, current, voltage and power
• Motor speed and torque
• Supply voltage and intermediate circuit DC voltage
• Reference values
• Drive temperature
• Operating time counter (h), kWh counter
• Digital I/O and analog I/O status
• PID controller actual values
Three signals can be shown simultaneously on the control panel display. It is also
possible to read the values through the serial communication link or through the
analog outputs.
Settings
Diagnostics
Parameter Additional Information
Group 15 ANALOG OUTPUTS Selection of an actual signal to an analog output
Group 92 DATASET OUTPUT SEL Selection of an actual signal to a dataset (serial
communication)
Actual Value Additional Information
Group 01 ACTUAL SIGNALS…
09 ACTUAL SIGNALS
Lists of actual signals