ABB ACS800 Series - Settings; Diagnostics

Program features
45
Settings
Diagnostics
Parameter Additional Information
15.01 Analog output in a motor 1 temperature measurement
35.01…35.03 Motor 1 temperature measurement settings
Other
Parameters 13.01…13.05 (AI1 processing) and 15.03…15.05 (AO1 processing) are not effective.
At the motor end the cable shield should be grounded through a 10 nF capacitor. If this is not
possible, the shield is to be left unconnected.
Actual Values Additional Information
01.35 Temperature value
02.15 Warning bit state
02.18 Fault bit states
02.20 Fault bit states
Warnings
MOTOR 1 TEMP Chapter Fault tracing and parameter 02.15
T MEAS ALM Chapter Fault tracing and parameter 02.15
Faults
MOTOR 1 TEMP Chapter Fault tracing and parameter 02.20