Actual signals and parameters
127
0… Passcode. The setting restores to 0 after the protection is activated/
inactivated.
Note: When activating, write down the passcode and store it in a safe
place.
1 = 1
84 ADAPTIVE PROGRAM
- selections of the function blocks and their input connections.
- diagnostics
For more information, see Adaptive Program Application Guide (code:
3AFE64527274 [English]).
84.01 STATUS Shows the value of the Adaptive Program status word. The table
below shows the alternative bit states and the corresponding values
on the panel display.
1 = 1
84.02 FAULTED PAR Points out the faulted parameter in the Adaptive Program. -
84.05 BLOCK1 Selects the function block for Block Parameter Set 1. See Adaptive
Program Application Guide (code: 3AFE64527274 [English]).
ABS 11
ADD 10
AND 2
BWISE 26
COMPARE 16
COUNT 21
DPOT 23
EVENT 20
FILTER 13
MASK-SET 24
MAX 17
MIN 18
MULDIV 12
NO 1
OR 3
PI 14
PI-BAL 15
PI-NEG 25
RAMP 22
SR 5
SW-CB 7
SW-IL 19
No. Name/Value Description FbEq
Bit Display Meaning
0 1 Stopped
1 2 Running
24 Faulted
3 8 Editing
4 10 Checking
5 20 Pushing
6 40 Popping
8 100 Initializing
To Next Page
Loading...
