Control panel
12
How to set speed reference
Step Action Press Key Display
1. To show the status row. 1 ->1242.0 rpm I
F
REQ 45.00 Hz
CURRENT 80.00 A
POWER 75.00 %
2. To switch to local control.
(Only if the drive is not under local
control, i.e. there is no L on the first row
of the display.)
1 L ->1242.0 rpm I
F
REQ 45.00 Hz
CURRENT 80.00 A
POWER 75.00 %
3. To enter the Reference Setting function. 1 L ->[1242.0 rpm]I
F
REQ 45.00 Hz
CURRENT 80.00 A
POWER 75.00 %
4. To change the reference.
(slow change)
(fast change)
1 L ->[1325.0 rpm]I
FREQ 45.00 Hz
CURRENT 80.00 A
POWER 75.00 %
5. To save the reference.
(The value is stored in the permanent
memory; it is restored automatically after
power switch-off.)
1 L -> 1325.0 rpm I
F
REQ 45.00 Hz
CURRENT 80.00 A
POWER 75.00 %
ACT PAR
FUNC
LOC
REM
REF
ENTER
To Next Page
Loading...
