ABB ACS800 Series - Panel Operation Mode Keys and Displays; Status Row

Control panel
10
Panel operation mode keys and displays
The figure below shows the mode selection keys of the panel, and the basic
operations and displays in each mode.
Status row
The figure below describes the status row digits.
Parameter Mode
Function Mode
Drive Selection Mode
Act. signal /
Enter selection mode
Accept new signal
Group selection
Parameter selection
Enter change mode
Accept new value
Fast value change
Slow value change
Function start
Drive selection
Enter change mode
Accept new value
Actual Signal Display Mode
ENTER
ENTER
ENTER
ENTER
Fault history selection
ID number change
Status row
Status row
ACT
PAR
FUNC
DRIVE
1 L -> 1242.0 rpm I
F
REQ 45.00 Hz
CURRENT 80.00 A
POWER 75.00 %
1 L -> 1242.0 rpm I
10 START/STOP
01 EXT1 STRT/STP/DIR
DI1,2
1 L -> 1242.0 rpm I
U
PLOAD <=<=
DOWNLOAD =>=>
CONTRAST 7
ACS 801 75 kW
ASAA5000
ID NUMBER 1
Act. signal /
Fault message scrolling
Actual signal
names and values
Parameter group
Parameter
Parameter value
Status row
List of functions
Device type
Application name,
version and
ID number
Row selection
xxxxx
Drive ID number
Drive control status
L = Local control
R = Remote control
“ “ = External control
Drive status
I = Running
O = Stopped
“ “ = Run disabled
1 L -> 1242.0 rpm I
Direction of rotation
-> = Forward
<- = Reverse
Drive reference