Actual signals and parameters
63
Actual signals and parameters
Chapter overview
The chapter describes the actual signals and parameters. The fieldbus equivalent
value is given for each signal/parameter. More data is given in chapter Additional
data: actual signals and parameters.
Terms and abbreviations
The table defines the terms and abbreviations used in the parameter and actual
signal tables.
Term Definition
Absolute Maximum
Frequency
Value of 20.08 FREQUENCY MAX, or 20.07 FREQUENCY MIN if the
absolute value of the minimum limit is greater than the maximum limit.
Absolute Maximum
Speed
Value of 20.02 MAXIMUM SPEED, or 20.01 MINIMUM SPEED if the
absolute value of the minimum limit is higher than the maximum limit.
Actual signal Signal measured or calculated by the drive. Can be monitored by the
user. No user setting possible.
FbEq Fieldbus equivalent: The scaling between the value shown on the panel
and the integer used in serial communication.
Parameter A user-adjustable operation instruction of the drive.
To Next Page
Loading...
