Control panel
19
How to download data from the panel to a drive
Consider the notes in section How to copy data from a drive to the panel above.
How to set the display contrast
Step Action Press Key Display
1. Connect the panel containing the
uploaded data to the drive.
2. Ensure the drive is in local control (L
shown on the first row of the display). If
necessary, press the LOC/REM key to
change to local control.
1 L -> 1242.0 rpm I
F
REQ 45.00 Hz
CURRENT 80.00 A
POWER 75.00 %
3. Enter the Function Mode. 1 L -> 1242.0 rpm O
U
PLOAD <=<=
DOWNLOAD =>=>
CONTRAST 4
4. Select the download function (a flashing
cursor indicates the selected function).
1 L -> 1242.0 rpm O
UPLOAD <=<=
DOWNLOAD =>=>
CONTRAST 4
5. Start the download. 1 L -> 1242.0 rpm O
DOWNLOAD =>=>
Step Action Press Key Display
1. Enter the Function Mode. 1 L -> 1242.0 rpm O
U
PLOAD <=<=
DOWNLOAD =>=>
CONTRAST 4
2. Select a function (a flashing cursor
indicates the selected function).
1 L -> 1242.0 rpm O
UPLOAD <=<=
DOWNLOAD =>=>
C
ONTRAST 4
3. Enter the contrast setting function. 1 L -> 1242.0 rpm O
CONTRAST [4]
4. Adjust the contrast. 1 L -> 1242.0 rpm
CONTRAST [6]
5.a Accept the selected value. 1 L -> 1242.0 rpm O
UPLOAD <=<=
DOWNLOAD =>=>
C
ONTRAST 6
5.b Cancel the new setting and retain the
original value, press any of the mode
selection keys.
The selected mode is entered.
1 L -> 1242.0 rpm O
UPLOAD <=<=
DOWNLOAD =>=>
C
ONTRAST 4
LOC
REM
FUNC
ENTER
FUNC
ENTER
ENTER
ACT
FUNC
DRIVE
PAR
To Next Page
Loading...
