Actual signals and parameters
79
FREQUENCY
MIN…300.00 Hz
Maximum frequency limit 100 = 1 Hz
20.10 MINIMUM TORQUE Minimum negative output torque as a percentage of the motor nominal
torque.
-600.0…0.0% Setting range. 100 = 1%
20.11 P MOTORING LIM Defines the allowed maximum power fed by the inverter to the motor.
0.0…600.0% Maximum motoring power limit in percent of the motor nominal power 100 = 1%
20.12 P GENERATING LIM Defines the allowed maximum power fed by the motor to the inverter.
-600.0…0.0% Maximum generating power limit in percent of the motor nominal
power.
100 = 1%
20.13 MIN TORQ SEL Selects the minimum torque limit for the drive.
MIN LIM1 Value of 20.15 TORQ MIN LIM 1 1
DI1 Digital input DI1.
0: Value of 20.15 TORQ MIN LIM 1.
1: Value of 20.16 TORQ MIN LIM 2.
2
DI2 See selection DI1. 3
DI3 See selection DI1. 4
DI4 See selection DI1. 5
DI5 See selection DI1. 6
DI6 See selection DI1. 7
DI7 See selection DI1. 8
DI8 See selection DI1. 9
DI9 See selection DI1. 10
DI10 See selection DI1. 11
DI11 See selection DI1. 12
DI12 See selection DI1. 13
AI1 Analog input AI1. See 20.20 MIN AI SCALE on how the signal is
converted to a torque limit.
14
AI2 See selection AI1. 15
AI3 See selection AI1. 16
AI5 See selection AI1. 17
AI6 See selection AI1. 18
PARAM 20.18 Limit given by 20.18 TORQ MIN PTR. 19
NEG MAX TORQ Inverted maximum torque limit defined by 20.14 MAX TORQ SEL. 20
20.14 MAX TORQ SEL Defines the maximum torque limit for the drive.
MAX LIM1 Value of 20.04 MAXIMUM TORQUE. 1
DI1 Digital input DI1.
0: Value of 20.04 MAXIMUM TORQUE.
1: Value of 20.17 TORQ MAX LIM2.
DI2 See selection DI1. 3
DI3 See selection DI1. 4
DI4 See selection DI1. 5
DI5 See selection DI1. 6
DI6 See selection DI1. 7
No. Name/Value Description FbEq
To Next Page
Loading...
