ABB IRB 1200 - Page 133

NoteAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the safeguarded space.
2
Article number is specified in Re-
quired tools and equipment on
page 132.
If the lamp is not lit, trace the fault by:
• inspecting whether the signal lamp is broken.
If so, replace it.
• inspecting cable connections.
• inspecting the cabling. Replace the cabling if
a fault is detected.
3
Product manual - IRB 1200 133
3HAC046983-001 Revision: S
© Copyright 2014 - 2021 ABB. All rights reserved.
3 Maintenance
3.3.6 Inspecting the signal lamp (option)
Continued