ABB IRB 1200 - Lifting and Turning a Suspended Mounted Robot

2.3.2 Lifting and turning a suspended mounted robot
Introduction
How to lift and turn the robot to a suspended position using the turning accessory
is described in the lifting instruction delivered with the turning accessory. Article
numbers for the accessory and the instruction is specified in Special tools on
page 891. Any additional equipment required is specified in the instruction for the
lifting accessory. Contact ABB for more information.
How to lift and turn the robot into position for wall position: Contact ABB for more
information.
How to lift and turn the robot into position for tilted position: Contact ABB for more
information.
70 Product manual - IRB 1200
3HAC046983-001 Revision: S
© Copyright 2014 - 2021 ABB. All rights reserved.
2 Installation and commissioning
2.3.2 Lifting and turning a suspended mounted robot