NoteAction
xx1300002422
Remove the screw that fastens the air hose hold-
er.
3
xx1300002421
Remove the screws that fasten the fix sheet to
the inner plastic guide.
4
xx1300002423
Remove the screws that fasten the fix sheet to
the motor.
5
xx1300002424
Pull out the fix sheet a bit, to access the screws
that fasten the cable bracket to the sheet.
Loosen the bracket from the sheet by removing
the two screws.
CAUTION
Do not loosen the cable clamp screw! There is a
risk of rearrangement of the cable layout which
would result in shortened lifetime of the cable
harness.
6
Continues on next page
Product manual - IRB 1200 429
3HAC046983-001 Revision: S
© Copyright 2014 - 2021 ABB. All rights reserved.
4 Repair
4.4.4 Replacing the axis-3 radial sealing and sealing ring
Continued
To Next Page
Loading...
