ABB IRB 1200 - Page 433

NoteAction
xx1400000332
Remove the screws.3
xx1400000333
Use screws in the two press out holes to
press the sealing ring out.
4
Refitting the sealings
Use these procedures to refit the axis-3 radial sealing and/or axis-3 sealing ring.
Refitting the axis-3 sealing ring
Use this procedure if the axis-3 sealing ring needs to be refitted.
NoteAction
For robots with protection type Clean
Room
1
For robots with food grade lubrication
For robots with protection type Hygienic
Clean the joints that have been opened and
wipe the parts free from particles with
spirit on a lint free.
Continues on next page
Product manual - IRB 1200 433
3HAC046983-001 Revision: S
© Copyright 2014 - 2021 ABB. All rights reserved.
4 Repair
4.4.4 Replacing the axis-3 radial sealing and sealing ring
Continued