Refitting the timing belt
Use these procedures to refit the axis-5 timing belt.
Refitting the axis-5 timing belt
NoteAction
For robots with protection type Clean
Room
1
For robots with food grade lubrication
For robots with protection type Hygienic
Clean the joints that have been opened and
wipe the parts free from particles with
spirit on a lint free.
xx1300002351
Refit the timing belt on the pulley.2
Belt tension: F = 26 N.Move the motor to achieve correct belt
tension (F = 26 N).
3
xx1300002350
Secure the motor with its attachment
screws.
4
Tightening torque: 3.5 Nm.
Continues on next page
Product manual - IRB 1200 775
3HAC046983-001 Revision: S
© Copyright 2014 - 2021 ABB. All rights reserved.
4 Repair
4.6.8 Replacing the axis-5 timing belt
Continued
To Next Page
Loading...
