Required equipment
NoteArticle numberEquipment
Lengths: 2 m (1 pcs), 1.5 m (1
pcs)
-Roundslings
Lifting capacity: 1,000 kg.
3 pcs3HAC15535-1Support legs
Valid for IRB 2600-20/1.65, IRB
2600-12/1.65, IRB 2600-12/1.85,
IRB 2600ID-15/1.85, IRB 2600ID-
8/2.0.
3HAC15520-2Guide pin, M8x150
Always use guide pins in pairs.
Valid for IRB 2600 Type C-
20/1.65, IRB 2600 Type C-
12/1.65.
3HAC13056-2Guide pin, M12x150
Always use guide pins in pairs.
Valid for IRB 2600-20/1.65, IRB
2600-12/1.65, IRB 2600-12/1.85,
IRB 2600ID-15/1.85, IRB 2600ID-
8/2.0.
-Lifting eye
M8
3 pcs
Valid for IRB 2600 Type C-
20/1.65, IRB 2600 Type C-
12/1.65.
-Lifting eye
M12
3 pcs
Content is defined in section
Standard tools on page 441.
Standard toolkit
These procedures include refer-
ences to the tools required.
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Included with spare part base. 3
pcs
3HAC065190-001Gasket
Loctite 7063-Cleaning agent
For cleaning.
Loctite 57412340011-116Flange sealant
For sealing.Only valid for IRB 2600-20/1.65,
IRB 2600-12/1.65, IRB 2600-
12/1.85, IRB 2600ID-15/1.85, IRB
2600ID-8/2.0.
Continues on next page
290 Product manual - IRB 2600
3HAC035504-001 Revision: Q
© Copyright 2009-2018 ABB. All rights reserved.
4 Repair
4.6.2 Replacing the base
Continued
To Next Page
Loading...
