ABB IRB 2600 Series - Inspecting Information Labels

3.3.7 Inspecting information labels
Location of information labels
The figure shows the location of the information labels to be inspected.
xx1000000205
Warning - Symbol of flash (4 pcs)A
Warning - Risk of tippingB
Label - Lifting instructionC
Warning - "High temperature"D
Label - Max. air pressureE
Warning - Brake release unitF
Label - CalibrationG
Label - Suspended robotH
Required equipment
NoteSpare part numberEquipment
See Spare part lists on
page 445.
Labels
Inspecting labels
Use this procedure to inspect the labels on the robot.
NoteAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot work-
ing area.
1
Continues on next page
Product manual - IRB 2600 135
3HAC035504-001 Revision: Q
© Copyright 2009-2018 ABB. All rights reserved.
3 Maintenance
3.3.7 Inspecting information labels