ABB IRB 2600 Series - Replacing Gearbox Axis 1; Gearboxes

4.8 Gearboxes
4.8.1 Replacing gearbox axis 1
Different versions of the gearbox
There are two different versions of the axis-1 and axis-2 gearboxes. The different
versions affect the mechanical structure of the base, frame and lower arm.
Differences in the mechanical structure are pointed out in the procedure as valid
for different robot version:
• IRB 2600-20/1.65, IRB 2600-12/1.65, IRB 2600-12/1.85, IRB 2600ID-15/1.85,
IRB 2600ID-8/2.0
• IRB 2600 Type C-20/1.65, IRB 2600 Type C-12/1.65
Further information about the differences are given in Non-compatible versions of
axis-1 and axis-2 gearboxes on page 428.
Continues on next page
Product manual - IRB 2600 357
3HAC035504-001 Revision: Q
© Copyright 2009-2018 ABB. All rights reserved.
4 Repair
4.8.1 Replacing gearbox axis 1