NoteAction
xx0800000291
When the robot is lifted the roundslings will
adjust themselves.
CAUTION
When lifting, the robot will tilt slightly back-
wards! Be careful not to damage the connec-
tion box at the base of the robot!
9
• A: Area where the connection
box can be damaged while lifting.
Lifting capacity:
• See Required equipment on
page 60
Lift the robot with an overhead crane.10
62 Product manual - IRB 2600
3HAC035504-001 Revision: Q
© Copyright 2009-2018 ABB. All rights reserved.
2 Installation and commissioning
2.3.1 Lifting robot with roundslings
Continued