Lower arm of IRB 2600 -12/1.85, IRB 2600ID -15/1.85 and -8/2.00
xx0900000492
The uppermost holes for fitting equipment on the lower arm are only applicable
to variant IRB 2600 -12/1.85.
-
Lower arm of IRB 2600 -20/1.65 and -12/1.65, IRB 2600 Type C-20(12)/1.65
xx0900000491
Continues on next page
84 Product manual - IRB 2600
3HAC035504-001 Revision: Q
© Copyright 2009-2018 ABB. All rights reserved.
2 Installation and commissioning
2.3.6 Fitting equipment on robot
Continued
To Next Page
Loading...
