Inspecting the oil level in axis-5 gearbox
Use this procedure to inspect the oil level in the gearbox.
NoteAction
Floor-mounted robot:1
Run the robot to calibration position.
xx2100002080
Option Inverted (3317-1)
Jog the robot into position:
• Axis 1: no significance
• Axis 2: 0°
• Axis 3: 0°
• Axis 4: 180°
• Axis 5: no significance
• Axis 6: no significance
2
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the safe-
guarded space.
3
Make sure that the oil temperature is +25°C
± 10°C.
4
WARNING
Handling gearbox oil involves several
safety risks, see Gearbox lubricants (oil or
grease) on page 29.
5
Continues on next page
Product manual - IRB 5720 135
3HAC079195-001 Revision: A
© Copyright 2022 ABB. All rights reserved.
4 Maintenance
4.3.10 Inspecting the oil level in axis-5 gearbox
Continued
To Next Page
Loading...
