NoteAction
xx1300000484
Unscrew the attachment screws that hold
the cable bracket.
5
xx1300000485
Unscrew the M4 screw that holds the carri-
er.
Note
The screw is located at the bottom of the
carrier.
6
xx1300001113
Pull out the carrier from its position.7
xx1300000666
Pull out the axis-6 motor cables by holding
the cables with one hand at the motor and
the other at the carrier.
8
Continues on next page
Product manual - IRB 5720 219
3HAC079195-001 Revision: A
© Copyright 2022 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the arm house cover including the axis-4 cassette sealing
Continued
To Next Page
Loading...
