NoteAction
Torx pan head screw: M5x12 Stainless
steel A2-70
Refit the motor cover with its attachment
screws.
7
Locking liquid: 3HAC041807-004 (Loctite
2400)
Use locking liquid.
Tightening torque: 6 Nm.
xx2100000596
Concluding procedure
NoteAction
See Filling oil into the axis-4 gear-
box on page 168.
Refill the gearbox with oil, if drained.1
See Calibration on page 557.Re-calibrate the robot.2
DANGER
Make sure all safety requirements are met when
performing the first test run.
3
384 Product manual - IRB 5720
3HAC079195-001 Revision: A
© Copyright 2022 ABB. All rights reserved.
5 Repair
5.8.4 Replacing the axis-4 motor
Continued
To Next Page
Loading...
