NoteAction
Lifting shackle: SA-10-8-NA1
xx2100001414
Fit a lifting shackle in the wrist lifting eye.3
xx2100001412
IRB 5720-180/2.6, IRB 5720-155/2.6 LID
Insert a M12x50 securing screw, not more than
10-15 mm, into the screw hole shown in the figure.
This is done to secure the roundsling from gliding
when lifting.
4
Roundsling, 1.5 m: Length: 1.5 m.Run a roundsling around the lower arm.5
IRB 5720-180/2.6, IRB 5720-155/2.6
LID
xx2100001415
Attach the roundsling to the shackle on the wrist.6
IRB 5720-125/3.0, IRB 5720-90/3.0
LID
xx2100001469
Continues on next page
Product manual - IRB 5720 477
3HAC079195-001 Revision: A
© Copyright 2022 ABB. All rights reserved.
5 Repair
5.9.2 Replacing the axis-2 gearbox
Continued
To Next Page
Loading...
