Required documents
NoteArticle numberDocument
3HAC065464-009Circuit diagram - OmniCore C90XT
3HAC066561-001Application manual - Conveyor
tracking
Installing the conveyor tracking module
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
2
xx1900001446
Opening the door on page 174.Open the door.3
Continues on next page
Product manual - OmniCore C90XT 135
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.7.7 Installing the conveyor tracking module
Continued
To Next Page
Loading...
