Note/IllustrationAction
xx1900001913
Fit the conveyor tracking module and
push the lower part until you hear a clear
clicking sound.
4
xx1900001912
Connect:
• B1.X1 - K2.X19.1, K2.X19.2(Power
cable)
• B1.X7 - K4.X1-5 (Ethernet cable)
5
See Application manual - Conveyor tracking.Connect wires to the input and output
connectors as required.
6
Closing the door on page 174.Close the door.7
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 165.
8
For more information about the option Conveyor Tracking, see Application
manual - Conveyor tracking.
136 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.7.7 Installing the conveyor tracking module
Continued
To Next Page
Loading...
