Note/IllustrationAction
How to insert cable through cable grommet,
see Releasing the cables from the cable
grommet assembly on page 314 and Refitting
the cables to the cable grommet assembly
on page 317.
Connect the 24V power supply to the
conveyor tracking module from the basic
box or other power supply.
5
Connected to Ethernet through the cable
grommet:
• B1.X7 - K4.X1-5
6
For details on connecting wires to the con-
veyor tracking module, see Application
manual - Conveyor tracking.
Connect wires to the input and output
connectors as required.
7
Closing the door on page 174.Close the door.8
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 165.
9
For more information about the option Conveyor Tracking, see Application
manual - Conveyor tracking.
152 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.8.2 Installing the conveyor tracking module to extension box
Continued
To Next Page
Loading...
