ABB OmniCore C90XT - Page 177

Note/IllustrationAction
xx1900001484
Remove the screws on the bracket.3
xx1900001485
Take out the axis computer with the
bracket from the cabinet.
Tip
Be careful with the locking hole on the
cabinet when doing assembling or disas-
sembling work.
4
xx1900001486
Continues on next page
Product manual - OmniCore C90XT 177
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.2.2 Replacing the axis computer
Continued