Note/IllustrationAction
xx1900001492
Remove the air filter.2
Removing the heat exchanger
Note/IllustrationAction
Disconnect heat exchanger:
• G3.X1-K2.X17
1
xx1900001490
Remove the screws locking the sensor
and pull out the sensor.
2
Continues on next page
Product manual - OmniCore C90XT 187
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.2.3.2 Replacing the heat exchanger
Continued
To Next Page
Loading...
