Note/IllustrationAction
xx1900001493
Remove the heat exchanger attachment
screws.
3
Take out the heat exchanger.4
Refitting the heat exchanger
Refitting the heat exchanger
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
Continues on next page
188 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.2.3.2 Replacing the heat exchanger
Continued