Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
2
xx1900001446
xx1900001494
Refit the heat exchanger into position
according to the location pin.
3
Continues on next page
Product manual - OmniCore C90XT 189
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.2.3.2 Replacing the heat exchanger
Continued
To Next Page
Loading...
