ABB OmniCore C90XT - Page 207

Note/IllustrationAction
xx1900001948
Connect the antenna cable to the Connec-
ted Services Gateway by rotating.
3
xx1900001949
Put the magnet part of the antenna on
the top the cabinet.
4
Concluding procedure
Note/IllustrationAction
Closing the door on page 174.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 165.
2
Product manual - OmniCore C90XT 207
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.2.6 Replacing the Connected Services Gateway
Continued