Note/IllustrationAction
xx1900001877
Remove the screws holding the main
computer.
2
xx1900001878
Remove the assembly from the mounting
plate.
Note
Avoid colliding with the frame when re-
moving the unit.
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
3
xx1900001885
i
For Connected Services Gateway wired, there is no power cable.
Continues on next page
268 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.2.12 Replacing the fieldbus master
Continued
To Next Page
Loading...
